KEENON Robotics KLEENBOT C40
About This Robot
Summary:
The KEENON KLEENBOT C40 is a professional 4-in-1 commercial floor-cleaning robot for small to medium indoor spaces. It combines sweeping, vacuuming, scrubbing and water extraction / drying, using a triple-brush dry-wet separation design to handle mixed dry debris and wet cleaning tasks without changing components. With up to 1,100 m2/hour stated cleaning efficiency, a 560 mm sweeping width, 400 mm vacuuming/scrubbing width and 16 L / 14 L water tanks, it is positioned for retail, office, hotel, healthcare, food-service and residential-area environments between roughly 500 and 4,500 m2. Its 65 cm minimum passage width and battery-swap support make it a practical option where customers need wet and dry cleaning in tighter commercial spaces.
Key Capabilities
- 4-in-1 cleaning: sweeping, vacuuming, dust mopping / dust pushing, scrubbing and water extraction / drying for mixed dry-wet floor care.
- Triple-brush dry-wet separation system supports sweeping and scrubbing in one pass and reduces cross-contamination between dry debris and dirty water.
- Up to 1,100 m2/hour cleaning efficiency, with stated suitability for 500-4,500 m2 indoor spaces.
- 560 mm sweeping width with dual side brushes and 400 mm vacuuming/scrubbing width for compact but efficient coverage.
- 16 L clean-water tank, 14 L dirty-water tank, 8 L dust bag and removable/washable wastewater tank for easier daily maintenance.
- 5-second battery swap and around 2-hour charging time, with KEENON stating up to 12 hours sweeping runtime and up to 5 hours scrubbing runtime.
- Sensor-fusion navigation using LiDAR and VSLAM-related sensing, with stereo vision, line laser, ultrasonic, RGB camera, collision sensor and IMU listed in the datasheet.
- Mobile app and KEENON Cloud support for immediate cleaning, scheduled cleaning, manual cleaning, teaching mode, break-point resumption, auto-recharging and multi-device coordination.
Applications
- Retail stores, supermarkets and shopping-centre units requiring wet and dry floor cleaning during or around trading hours.
- Commercial offices and mixed-use facilities with hard floors, vinyl, epoxy, granite, artificial stone or short-pile carpet zones.
- Hotels, serviced apartments and hospitality common areas such as lobbies, corridors, cafés and back-of-house spaces.
- Hospitals, care environments and clinics where routine floor cleanliness and dry-after-scrub operation are important.
- Food and beverage locations such as cafés or restaurants where crumbs, dry debris and small wet spills are recurring cleaning tasks.
- Residential areas or apartment-building common spaces, where compact navigation and multi-surface cleaning are useful.
- Small to medium public-facing commercial spaces of roughly 500-4,500 m2, subject to site assessment and floor suitability.
Why Choose It
- Better fit than a dry-only robot where the customer needs both dry debris pickup and wet scrubbing in the same daily workflow.
- Dry-wet separation and removable/washable dirty-water tank reduce odour, sludge and maintenance pain compared with mixed-waste designs.
- The 65 cm minimum passage width makes it more practical for tighter cafés, stores, corridors and small commercial layouts than larger scrubber robots.
- Battery-swap support helps sites extend operation without waiting for a full charge, while the charging pile option supports automated recharge workflows.
- Good candidate for visible daytime cleaning because the suction/water-extraction design aims to leave floors dry quickly after scrubbing.
- For very large sites, heavy industrial debris or long unattended wet-scrubbing cycles, a larger model such as C55 may be a better shortlist candidate.
Key Features
Sweeping, vacuuming, dust mopping / dust pushing, scrubbing and water extraction in one compact commercial robot.
Separate handling of dry debris and dirty water helps reduce cross-contamination, odour and daily maintenance burden.
55 cm body width and 65 cm minimum passage width for tighter stores, offices, cafés, hotels and healthcare spaces.
5-second battery swap support plus around 2-hour charging for more continuous cleaning operations.
Mobile app and KEENON Cloud support for scheduling, task management, break-point resumption and multi-device coordination.
Technical Details
1280 Wh (DC 25.6 V, 50 Ah)Wh
2hours
Sweeping, vacuuming, dust mopping / dust pushing, scrubbing and water extraction / drying
560 sweeping; 400 vacuuming/scrubbingmm
16L
578 x 500 x 690 without squeegee; 616 x 550 x 690 with squeegeemm
1100m2/hour
Up to 12 sweeping; up to 5 scrubbinghours
≤8 navigation only; ≤2 cleaning taskdegrees
Sensor fusion with LiDAR and VSLAM sensor; datasheet lists LiDAR, stereo vision, line laser, ultrasonic, RGB camera, collision sensor and IMU
70dB
Multi-modal 3D perception with LiDAR, stereo vision, line laser, ultrasonic, RGB camera, collision sensor and IMU
Short-pile carpet, marble, wood, tiles, vinyl, epoxy, granite, artificial stone and hard indoor floors
14L
70kg
Manufacturer
KEENON Robotics
Manufacturer
Free, no obligation — we'll connect you with the right seller
Continue exploring KEENON Robotics KLEENBOT C40
Explore related areas to find the right robot for your operation.