Pudu MT1 Max
Our view
Best for: Semi-outdoor and outdoor sweeping, IP54
Installed, trained and serviced in the UK · Buy or lease over 36 months · Ask for a quote
About This Robot
Summary:
The PUDU MT1 Max is an AI-powered autonomous commercial sweeping robot designed for large-scale hard-floor environments such as airports, railway stations, residential courtyards, parking garages and other controlled indoor, semi-outdoor or outdoor areas. It combines a 700 mm sweeping path, 35 L dustbin and AI-supported debris recognition with cover cleaning up to 2,200 m2/hour and Ultra Spot Clean performance up to 7,000 m2/hour. LiDAR and vision-fusion positioning, 3D perception and multi-sensor obstacle avoidance support operation around vehicles, pedestrians and animals. For facilities teams, its main value is high-area dry sweeping with 5-10 hours of runtime and optional autonomous charging, subject to flat hardened floors and restrictions on rain, snow, standing water and extreme weather.
Key Capabilities
- Dry sweeping in manual, automatic and scheduled modes, using side brushes and a roller brush to collect paper scraps, plastic film and other debris.
- AI Cleaning recognises debris and stains and adjusts cleaning mechanism parameters; Ultra Spot Clean uses heatmap data to target high-probability waste areas.
- LiDAR and vision-fusion positioning, 3D LiDAR, RGB/RGB-D cameras and drop sensors support mapping, localisation and obstacle perception.
- Published performance of up to 2,200 m2/hour for cover cleaning and 7,000 m2/hour for spot cleaning, with a 700 mm cleaning width, 35 L dustbin and 0 cm edge-cleaning claim.
- 5-10 hours of runtime, approximately 3.5 hours charging and optional fully autonomous charging through a charging station or workstation.
- Dynamic vehicle, pedestrian and animal avoidance, a physical emergency stop, audible and visual alerts, warning lighting and IP54 protection.
- Cleaning reports, map and task management, scheduled tasks, software upgrades, mobile-app support and PUDU Link integration support operational management.
Applications
- Airports and railway stations: large concourses, service routes and other suitable hardened-floor zones with defined traffic controls.
- Parking garages and transport facilities: repeatable sweeping of flat parking levels, circulation areas and covered approaches.
- Residential courtyards and commercial estates: outdoor or semi-outdoor common areas, walkways and service zones on suitable hardened floors.
- Industrial parks and manufacturing facilities: factory approaches, covered production-adjacent areas and large hard-floor circulation routes.
- Logistics and warehousing sites: depot approaches, loading-zone surroundings and controlled yard routes where surfaces and traffic are assessed.
- Retail and mixed-use developments: shopping-centre exteriors, service areas and pedestrianised hard-floor zones with mapped boundaries.
- Public-sector campuses and civic sites: plazas, municipal facilities and large public routes where weather, crowd and fall risks are controlled.
Why Choose It
- Best fit for buyers that need a dedicated high-capacity sweeper for large hardened-floor sites rather than a compact indoor scrubber.
- Combines high theoretical productivity, a 35 L dustbin, 700 mm path and edge-to-edge sweeping to reduce the frequency of manual passes.
- AI debris recognition, adaptive cleaning and Ultra Spot Clean can focus cleaning effort on areas with a higher probability of waste.
- 3D perception and differentiated avoidance strategies are designed for mixed-traffic environments involving vehicles, pedestrians and animals.
- Long runtime, scheduled tasks, cleaning reports and optional autonomous charging can reduce routine operator touchpoints, although dustbin and consumable maintenance remain manual.
- Buyers should confirm local certification, warranty and service coverage, charging-station requirements, data handling and site suitability for slopes, passages, thresholds, standing water and weather before deployment.
Key Features
Combines 3D LiDAR and multi-sensor fusion with differentiated avoidance for vehicles, pedestrians and animals.
Recognises debris and stains, adjusts cleaning parameters and uses heatmap data to target areas with a higher probability of waste.
Provides up to 2,200 m2/hour cover cleaning, up to 7,000 m2/hour spot cleaning and a stated site coverage of up to 100,000 m2.
Uses a 700 mm sweeping path, 35 L dustbin and a published 0 cm edge-cleaning distance for mixed debris.
Supports scheduled tasks, reports, automatic filter cleaning and optional autonomous recharging for extended operation.
Technical Details
60 Ah; Wh not confirmedAh
<3.5hours
Dry sweeping; manual mode; automatic mode; scheduled tasks; AI Cleaning; Ultra Spot Clean
700mm
Not applicable - dry sweeping robotL
840 x 600 x 675mm
Cover cleaning max. 2,200; spot cleaning max. 7,000m2/hour
5-10; standard mode 8hours
3 degrees maximum while cleaning; 8 degrees in non-cleaning modedegrees
VSLAM + marker positioning + 3D LiDAR SLAM; LiDAR and vision-fusion positioning
<75dB(A)
3D LiDAR, RGB/RGB-D and drop sensors; dynamic vehicle, pedestrian and animal avoidance; emergency stop; audible and visual warnings
Polished concrete, epoxy resin, rubber, regular masonry, ceramic tile and other hardened floors
Not applicable - 35 L dry dustbinL
85kg
Manufacturer
Pudu Robotics
Manufacturer
Free, no obligation — we supply, install and service every robot we sell
Documents
Frequently asked questions
What is the price of Pudu MT1 Max?
Pricing for the Pudu MT1 Max is on application. You can buy outright or lease over 36 months with installation and service included. Ask us for a quote.
Continue exploring Pudu MT1 Max
Explore related areas to find the right robot for your operation.